Bmb-home HOME PROTECTOR+ Instrukcja Użytkownika Strona 17
- Strona / 32
- Spis treści
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
P/N 033000=13610 Rev. 01-02-06 BMB Home Security
17
4. Use the menu buttons UP/DOWN? to go to menu item 4. MESSAGE. Press OK to select this menu item. You can
also go to this menu item directly by pressing a 4 on the number pad.
5. Press 1 for RECORD.
6. The display now shows PLEASE WAIT.
7. When the display reads SPEAK NOW you can record your message (max. 12 seconds). The distance to the
microphone should be more or less around 30 cm.
8. After recording, wait until the RECORD/REPLAY option comes up again.
9. Press 2 (REPLAY) to listen to the recorded message.
10. Press CLEAR to quit the menu. To confirm this choice, press 1 for Yes or 2 for No. If you choose Yes, you
will quit the menu. If you choose No, you go back to the first menu item.
6. Using the Protector+ Security System
6.1 Setting the alarm
The system has two different alarm functions:
1) ARM AWAY: Full alarm. All registered Sensors will be activated.
2) ARM HOME: Partial alarm. All Door/Window sensors will be activated, but the motion detectors are not
armed. This means you can walk around the house, while the ‘shell’ of is protected.
a) A single press arms all Door/Window Sensors
b) A double press of ARM HOME results in every sensor to be active in zones 1-16 but motion
detectors are still not active in zones 17-30. All Door/Window Sensors are however active in zones
17-30.
+Switching on the ARM AWAY function
Via the console
Press the ARM AWAY button on the console. The system will be activated after a short delay (delay can be set,
see exit delay 8.1). During the delay you will hear a couple of tones at the same pitch, and the display will read
EXIT DELAY.
After switching the system to ARMED AWAY mode, the entry delay will be used for DS18 Door/Window Sensors
(DS18 switch set to MAX) when you enter the house. This means you have enough time to switch off the system
via the console without triggering the alarm. The delay times can be changed, see 8.1.
Also Motion Sensors registered to zone 15 and/or 16 will have an entrance delay according the time set. This
gives the opportunity to have entrances secured via Motion Sensors.
Besides the Security function, the ARM AWAY button on the console reflects Temperature Setback options, to
be used for energy saving:
Press the ARM AWAY button on the console. The system will be activated after a short delay:
-A single press: Thermostat remains setting of respective TS10. Display will show COMFORT.
-Press twice; thermostat level will be set to Economy Level. Display will show ECONOMY.
-Third press: thermostat level will be set to Frost Level. Display will show FROST.
The first press of ARM AWAY will leave the thermostat working exactly as it would do if the system was not
armed i.e. it will follow the set-point on the thermostat(s) unless there is a timer event set which could change it.
Via the Key Chain Remote Control KR18
Press the ARM button. The alarm is switched on instantly.
Via the Comfort Remote Control SH600
Set the slide switch to SEC. Press the ARM AWAY button. The alarm is switched on instantly.
+Switching on the ARM HOME function
Via the console
Press the ARM HOME button on the console. The alarm is switched on instantly.
-A single press arms all Door/Window Sensors. Display will read ARM HOME 1.
-A double press of ARM HOME actives all Sensors in zones 1-16. Display will read ARM HOME 2.
Via the Key Chain Remote Control KR18
You cannot switch on the ARM HOME function with this remote control.
Via the Comfort Remote Control SH600
Set the slide switch to SEC. Press the ARM HOME button. The alarm is switched on instantly.
Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Bmb-home HOME PROTECTOR+
(6 strony)
(8 strony)Crate Amplifiers KX-50 manuels
Manuels d'utilisation et guides de l'utilisateur pour Accessoires pour la musique Crate Amplifiers KX-50.
Nous fournissons des manuels en pdf 1 Crate Amplifiers KX-50 à télécharger gratuitement par type de document : Manuel de l'utilisateur
Komentarze do niniejszej Instrukcji