Bmb-home HOME PROTECTOR+ Podręcznik Użytkownika Strona 6

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 188
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 5
28-6-2011 6 033000=13069F
Dial in: by calling the system, you can control the system remotely and check the
status (speech feedback). The Base Console also lets control Home Automation
functions and Temperature settings.
Status/feedback functionality with both lamp and remote chime (multi-tone).
When triggered, zones 27-32 can give a programmable ON/OFF command to
defined X10 addresses.
7 days timer; create events to occur only selected week, weekly or random (14
timer points).
Prevention with so called “LIVED IN LOOK”: Your lights are switched ON and OFF in
such a way that it appears as if you are home, in respond to the 7 days timer.
Can use up to 4 Thermostats TS10. Temperature points to create e.g.: Comfort,
Economy and Frost Level.
Energy saving: By pressing ARM AWAY once, Thermostat Comfort Settings remain,
by pressing ARM AWAY twice thermostats controls are set to Economy. Third press will
activate Frost level control.
Dial-in and selecting Thermostat will give the option to set Thermostat 1 thru
Thermostat 4 without disarming the system.
Events log (latest 40 security events).
Rechargeable batteries in console.
1.2 Signal Range
The sensors have an open air range of up to 100m, but less in a built environment.
Walls, ceilings and other large object will influence the range. The range depends
strongly on the property’s environmental conditions. One other factor that can
decrease the range is the presence of other (distorting) high-frequency signals on the
same RF frequency (433MHz). RF wireless headphones and wireless speakers can
influence the range. They cannot cause a false alarm. Wireless (DECT) phones or W-
LAN networks do not influence the system.
2. The security console
(1) Display.
(2) ARMED Indicator lights up when the alarm is switched on.
(3) Built-in Siren
(4) BATTERY Indicator lights up when the backup batteries are empty or not installed.
(5) Tamper contact.
(6) AC power supply adapter connections.
Przeglądanie stron 5
1 2 3 4 5 6 7 8 9 10 11 ... 187 188

Komentarze do niniejszej Instrukcji

Brak uwag